ChinaAutoRegs｜GB/T 3934-2003 英文版/翻译/English 普通螺纹量规 技术条件
Specification of Gauges for General Purpose Screw Threads

1 SCOPE

This standard specifies the terms and definitions, classification, symbols, profile, tolerance, requirements, inspection, marking and packaging of gauges for general purpose screw threads.
This standard is applicable to the gauges for general purpose screw threads with a thread angle of 60°, a nominal diameter of 1 mm to 355 mm and a screw pitch of 0.2 mm to 8 mm.
The gauges for general purpose screw threads specified in this standard (hereinafter referred to as “thread gauge”) is applicable to the inspection of general purpose screw threads specified in GB/T 192-2003, GB/T 193-2003, GB/T 196-2003 and GB/T 197-2003.

2 NORMATIVE REFERENCES

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition applies.
GB/T 192-2003 General purpose metric screw threads – Basic profile (ISO 68-1: 1998, MOD)
GB/T 193-2003 General purpose metric screw threads – General plan (ISO 261: 1998, MOD)
GB/T 196-2003 General purpose metric screw threads – Basic dimensions
GB/T 197-2003 General purpose metric screw threads – Tolerances (ISO 965-1: 1998, MOD)

3 TERMS AND DEFINITIONS

For the purposes of this standard, the terms and definitions specified in GB/T 192-2003, GB/T 193-2003, GB/T 196-2003, and GB/T 197-2003 and the following apply.

***********************************************
现成译文，到款即发。
任取样页验证译文质量。
免费提供正规增值税发票。
提供WORD/PDF版本，可自行编辑！
请联系 手机/微信: 133-0649-6964/Email: standardtrans@foxmail.com/QQ: 564965870 购买完整译文。
专业源于专注|舍吾予言标准翻译[ChinaAutoRegs]深耕于机动车标准翻译！迄今为止已翻译上千个国内外汽车法规标准！独家打造千万级汽车专业术语库和记忆库。