ChinaAutoRegs｜GB/T 5720-2008英文版/翻译/English O形橡胶密封圈试验方法
Test Methods for Rubber O-Rings
1 SCOPE
This standard specifies the test methods for dimensional measurement, hardness, tensile property, hot-air accelerated aging, compression set at constant strain, corrosion test, liquid resistance, density, shrinkage rate, low temperature test, and compression stress relaxation, of solid vulcanized rubber O-rings.
This standard is applicable to solid vulcanized rubber O-rings (hereinafter referred to as “O-rings”).
2 NORMATIVE REFERENCES
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, the parties who enter into agreement according to this part are encouraged to research whether the latest editions of these documents may be applied. For undated references, the latest edition referred to apply.
GB/T 528-1998 Rubber, Vulcanized or Thermoplastic-Determination of Tensile Stress-Strain Properties (eqv ISO 37:1994)
GB/T 533-1991 Rubber Vulcanized or Thermoplastic-Determination of Density (ISO 2781:2007, IDT)
GB/T 1690-1992 Rubber, Vulcanized-Determination of the Effect of Liquids (neq ISO 1817)
GB/T 2941-2006 Rubber-General Procedures for Preparing and Conditioning Test Pieces for Physical Test Methods (ISO 23529:2004, IDT)
GB/T 3452.2-2007 Fluid Power Systems-O-rings-Part 2: Quality Acceptance Criteria (ISO 3601-3:2005, IDT)
GB/T 3512-2001 Rubber, Vulcanized or Thermoplastic-Accelerated Ageing and Heat Resistance Tests-Air-oven Method (eqv ISO 188:1998)
GB/T 6031-1998 Rubber, Vulcanized or Thermoplastic-Determination of Hardness (Hardness between 10IRHD and 100IRHD) (idt ISO 48:1994)
GB/T 7758-2002 Rubber, vulcanized–Determination of Low-Temperature Characteristics-Temperature-Retraction Procedure (TR Test) (ISO 2927:1997, IDT)
GB/T 7759-1996 Rubber, Vulcanized or Thermoplastic-Determination of Compression Set at Ambient Elevated or Low Temperatures (eqv ISO 815:1991)
GB/T 13643-1992 Rubber, Vulcanized or Thermoplastic-Determination of Compression Stress Relaxation (Rings) (eqv ISO 6059:1987)
HG/T 2369-1992 Rubber Plastic Tensile Tester Technical Conditions
3 REQUIREMENTS FOR TEST SPECIMENS AND TEST CONDITIONS
***********************************************
现成译文，到款即发。
任取样页验证译文质量。
免费提供正规增值税发票。
提供WORD/PDF版本，可自行编辑！
请联系 手机/微信: 133-0649-6964/Email: standardtrans@foxmail.com/QQ: 564965870 购买完整译文。
专业源于专注|舍吾予言标准翻译[ChinaAutoRegs]深耕于机动车标准翻译！迄今为止已翻译上千个国内外汽车法规标准！独家打造千万级汽车专业术语库和记忆库。