ChinaAutoRegs｜GB/T 37336-2019 英文版/English/翻译/汽车制动鼓
Brake Drum of Automobile
1 SCOPE
This standard specifies the terms and definitions, classification, technical requirements and test methods of the brake drum for automobile.
This standard applies to the brake drums, of which the body material is grey cast iron and which is intended for the service brake of Category M and N vehicles as specified in GB/T 15089-2001.
2 NORMATIVE REFERENCES
The following referenced documents are indispensable for the application of this document. For dated references, only the editions cited apply. For undated references, the latest editions of the normative document (including any amendments) apply.
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy – The diantipyrylmethane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.58 Methods for chemical analysis of iron, steel and alloy – The extraction-absorption catalytic polarographic method for the determination of manganese content
GB/T 223.59 Iron, steel and alloy-Determination of phosphorus content-Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy–The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy–The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy–The sodium(potassium) periodate photometric method for the determination of manganese content
GB/T 228.1 Metallic materials – Tensile testing – Part 1 : Method of test at room temperature
GB/T 231.1 Metallic materials – Brinell hardness test – Part 1:Test method
GB/T 1031 Geometrical product specifications (GPS) – Surface texture: Profile method – Surface roughness parameters and their values
GB/T 1958 Geometrical Product Specifications(GPS)-Geometrical tolerance -Verification
GB/T 3177 Geometrical product specifications (GPS)-Inspection of plain workpiece sizes
GB/T 7216 Metallographic test for gray cast iron
GB/T 9239
(All parts) Mechanical vibration – Rotor balancing
GB/T 9439-2010 Grey Iron Castings
GB/T 20123 Steel and iron – Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)
QC/T 556 Automotive Brake-Temperature measurement and thermocouple installation
***********************************************
现成译文，到款即发。
任取样页验证译文质量。
免费提供正规增值税发票。
请联系手机/微信: 133-0649-6964/Email: standardtrans@foxmail.com 购买完整译文。
专业源于专注|舍吾予言标准翻译/ChinaAutoRegs/始终专注于机动车标准翻译！迄今为止已翻译上千个国内外汽车法规标准！独家打造千万级汽车专业术语库和记忆库。