QC/T 29106-2014 英文版翻译 汽车电线束技术条件

ChinaAutoRegs|QC/T 29106-2014 英文版/English/翻译/汽车电线束技术条件
Technical Specification of Automobile Wire Harness

1 SCOPE

This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, storing and caretaking of automobile wire harness (hereinafter referred to as “wire harness”).

This standard applies to all types of vehicle use wire harnesses (single wire included) with nominal voltage of less than 60V.

2 NORMATIVE REFERENCES

The following documents for the application of this document are essential. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendment) applies.

GB/T 2423.1-2008 Environmental testing for electric and electronic products – Part 2: Test methods – Tests A: Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products – Part 2: Test methods – Tests B: Dry heat
GB/T 2423.17-2008 Environmental testing for electric and electronic products – Part 2: Test method – Test Ka: Salt mist
GB/T 2423.22-2002 Environmental testing for electric and electronic products – Part 2: Test methods Test N: Change of temperature
GB/T 2828.1-2012 Sampling procedures for inspection by attributea-Part1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 4086 Glass Cleaner
GB 8410-2006 Flammability of automotive interior materials
GB 11121 Gasoline engine oils
GB 11122 Diesel engine oils
GB/T 13527.2 Plasticized polyvinyl chloride tubing for electrical insulation
GB 17930 Gasoline for motor vehicles
GB 19147 Automobile diesel fuels
GB/T 25085 Road vehicles—60 V and 600 V single-core cables
GB/T 28046.3-2011 Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 3:Mechanical loads
QC/T 238 Storage and preservation for automotive parts
QC/T 349 Plastic fastening belt
QC/T 417.1-2001 Road Vehicles – Connections for On-board Electrical Wiring Harnesses – Part 1: Definitions, Test Methods and General Performance Requirements (the Automobile Part)
QC/T 417.3 Road Vehicles-Connections for On-board Electrical Wiring Harnesses- Part 3: Tabs for Single-pole Connections- Dimensions and Specific Requirements
QC/T 417.4 Road Vehicles-Connections for on-board Electrical Wiring Harnesses–Part 4: Tabs for Multi-pole Connections- Dimensions and Specific Requirements
QC/T417.5 Road vehicles – connections for on-board electrical wiring harnesses –Part 5 Column Tabs for Single- and Multi-pole Connections – Dimensions and Specific Requirements
QC/T 29010 Type, size and technical requirements for automobile low-voltage wire terminal
QC/T 29013 Wire joint type, size and technical requirements for automobile storage battery
HG/T 2196 Standard classification system for rubber products in automotive application
JB/T 6313.1 Braided copper wires for electrical purposes- Part 1:General
JB/T 6313.2 Braided copper wires for electrical purposes- Part 2:Diagonal braided wires
JB/T 6313.3 Braided copper wires for electrical purposes- Part 3:Plain braided wires
NB/SH/T 0521 Ethylene glycol and propylene glycol base engine coolants
SJ/T 11363 Requirements for concentration limits for certain hazardous substances in electronic information products

***********************************************
现成译文,到款即发。
任取样页验证译文质量。
免费提供正规增值税发票。
请联系手机/微信: 133-0649-6964/Email: standardtrans@foxmail.com 购买完整译文。
专业源于专注|ChinaAutoRegs始终专注于汽车标准法规翻译!迄今为止已翻译上千个国内外汽车法规标准!独家打造千万级汽车专业术语库和记忆库。

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注