ChinaAutoRegs\uff5cGBT 5779.1-2000 \u82f1\u6587\u7248\/English\/\u7ffb\u8bd1\/\u7d27\u56fa\u4ef6\u8868\u9762\u7f3a\u9677 \u87ba\u6813\u3001\u87ba\u9489\u548c\u87ba\u67f1 \u4e00\u822c\u8981\u6c42
\nFasteners-Surface discontinuities-Bolts, screws and studs for general requirements<\/p>\n
\n1 Scope
\n1.1 This Standard establishes limits for various types of surface discontinuities on bolts, screws and studs for general requirements.
\nIt applies to bolts, screws and studs with
\n\u2014 nominal thread diameters 5 mm and larger;
\n\u2014 product grades A and B;
\n\u2014 property classes up to and including 10.9, unless otherwise specified in product standards or agreed between supplier and purchaser.
\n1.2 Limits for surface discontinuities on bolts, screws and studs for special requirements (e.g. automatic assembly) are laid down in GB\/T 5779.3. When the engineering requirements of the application necessitate that surface discontinuities on bolts, screws and studs be more closely controlled, it should be specified in the respective product standard, or the purchaser shall specify the applicable limits in the inquiry and purchase order.
\n1.3 Where the permissible limits for surface discontinuities indicated in clause 3 occur, the minimum values for the mechanical and functional properties specified in GB\/T 3098.1 shall still be met.
\nNOTES:
\n1 The figures in clause 3 are examples only. They apply correspondingly also to other types of bolts, screws and studs.
\n2 The individual figures show the surface discontinuities exaggerated in some cases for clarity.
\n2 Normative references
\nThe following standards contain provisions which, through reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed below.
\nGB\/T 90-1985 Acceptance inspection, marking and packaging of fasteners (eqv ISO 3269:1984)
\nGB\/T 1031-1995 Surface roughness parameters and their values (neq ISO 468:1982)
\nGB\/T 2828-1987 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
\nGB\/T 3098.1-2000 Mechanical properties of fasteners Bolts, screws and studs (idt ISO 898-1:1999)
\nGB\/T 5779.3-2000 Fasteners-Surface discontinuities-Bolts, screws and studs for special requirements (idt ISO 6157-3:1988)
\nGB\/T 15239-1994 Sampling procedures and tables for isolated lot inspection by attributes<\/p>\n
<\/p>\n
*********************************************** ChinaAutoRegs\uff5cGBT 5779.1-2000 \u82f1\u6587\u7248\/Englis … \u7ee7\u7eed\u9605\u8bfb
\u73b0\u6210\u8bd1\u6587\uff0c\u5230\u6b3e\u5373\u53d1\u3002<\/span>
\u4efb\u53d6\u6837\u9875\u9a8c\u8bc1\u8bd1\u6587\u8d28\u91cf\u3002<\/span>
\u514d\u8d39\u63d0\u4f9b\u6b63\u89c4\u589e\u503c\u7a0e\u53d1\u7968\u3002<\/span>
\u8bf7\u8054\u7cfb\u624b\u673a\/\u5fae\u4fe1: 133-0649-6964\/Email: standardtrans@foxmail.com \u8d2d\u4e70\u5b8c\u6574\u8bd1\u6587\u3002<\/span>
\u4e13\u4e1a\u6e90\u4e8e\u4e13\u6ce8|\u820d\u543e\u4e88\u8a00\u6807\u51c6\u7ffb\u8bd1\/ChinaAutoRegs\/\u59cb\u7ec8\u4e13\u6ce8\u4e8e\u673a\u52a8\u8f66\u6807\u51c6\u7ffb\u8bd1\uff01\u8fc4\u4eca\u4e3a\u6b62\u5df2\u7ffb\u8bd1\u4e0a\u5343\u4e2a\u56fd\u5185\u5916\u6c7d\u8f66\u6cd5\u89c4\u6807\u51c6\uff01\u72ec\u5bb6\u6253\u9020\u5343\u4e07\u7ea7\u6c7d\u8f66\u4e13\u4e1a\u672f\u8bed\u5e93\u548c\u8bb0\u5fc6\u5e93\u3002<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"