ChinaAutoRegs\uff5cGB\/T 6461-2002 \u82f1\u6587\u7248\u7ffb\u8bd1\/\u91d1\u5c5e\u57fa\u4f53\u4e0a\u91d1\u5c5e\u548c\u5176\u5b83\u65e0\u673a\u8986\u76d6\u5c42 \u7ecf\u8150\u8680\u8bd5\u9a8c\u540e\u7684\u8bd5\u6837\u548c\u8bd5\u4ef6\u7684\u8bc4\u7ea7
\nMethods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates – Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests<\/p>\n
<\/p>\n
1 SCOPE<\/p>\n
This Standard specifies a method of evaluating the condition of decorative and protective metallic and inorganic coated test panels or articles which have been exposed to corrosive environments for test or for other purposes.
\nThe method specified in this standard is applicable to test panels or articles exposed to natural atmospheres, in mobile or static conditions, and subjected to accelerated tests.
\nNote 1: Examples are given in the Bibliography of this standard.
\nThis Standard recognizes that the protection rating can be assessed objectively in accordance with Clause 6. However, the assessment of appearance depends on many subjective factors (see 6.2).
\nNote 2: The edges of test panels or articles may be protected, e.g. by tape or wax, if this is an agreed part of the test and is recorded in the test report. This is essential if the specimens are cut from larger pieces and have exposed uncoated edges.<\/p>\n
2 TERMS AND DEFINITIONS<\/p>\n
For the purpose of this document, the following terms and definitions apply.<\/p>\n
2.1
\nprotection rating
\nRp
\nprotection rating number (see Table 1) assigned to the ability of the coating to protect the base metal from corrosion
\n2.2
\nprotection defect
\ndefect used to assess the protection rating, including crater corrosion, pin-hole corrosion, corrosion stain due to corrosion from the substrate, blisters and other defects that involve base metal corrosion
\nNote: Blisters on electroplated aluminum and zinc alloy die castings usually signify base metal corrosion, but the inspector\u2019s judgment may be required to decide whether a blister does or does not arise at the substrate\u2013coating interface.
\n2.3
\nappearance rating
\nRA
\nrating number (see Table 1) and symbols (see Table 2) assigned to describe the overall appearance of the specimen, including all defects caused by exposure
\n2.4
\nappearance defect
\ndefect that detracts from the appearance of the specimen (see Table 2)
\n2.5
\nperformance rating
\ncombination of the protection rating number (Rp) followed by a slash mark followed by the appearance rating number (RA), i.e. Rp\/RA
\n2.6
\ncoating system
\nparticular series of deposits including the thickness and type of layers in multilayer deposits and treatments which have been applied to the base metal
\n2.7
\nsignificant surface
\npart of the surface which is essential in the appearance or serviceability of the article and which is to be covered or is covered by the coating (see Clause 5)<\/p>\n
<\/p>\n
1\u3001\u73b0\u6210\u8bd1\u6587\uff0c\u5230\u6b3e\u5373\u53d1\u3002<\/span> 1. The English Translation of this document (GB, GB\/T, QC\/T, CNCA, CQC, CAV, etc.) is readily available, and delivered immediately upon payment.<\/span> ChinaAutoRegs\uff5cGB\/T 6461-2002 \u82f1\u6587\u7248\u7ffb\u8bd1\/\u91d1\u5c5e\u57fa\u4f53\u4e0a … \u7ee7\u7eed\u9605\u8bfb
\n2\u3001\u4e0b\u5355\u524d\u53ef\u4efb\u53d6\u6837\u9875\u9a8c\u8bc1\u8bd1\u6587\u8d28\u91cf\u3002<\/span>
\n3\u3001\u514d\u8d39\u63d0\u4f9b\u6b63\u89c4\u666e\u901a\u589e\u503c\u7a0e\u6570\u7535\u53d1\u7968\u3002<\/span>
\n4\u3001\u8bf7\u8054\u7cfb\u624b\u673a\/\u5fae\u4fe1: 13306496964\/Email: standardtrans@foxmail.com \u83b7\u53d6\u5b8c\u6574\u8bd1\u6587\u3002<\/span>
\n5\u3001\u672c\u82f1\u6587\u8bd1\u672c\u4e3a\u7eaf\u4eba\u5de5\u4e13\u4e1a\u7cbe\u7ffb\u7248\u672c\uff0c\u4fdd\u8bc1\u8bed\u6cd5\u672f\u8bed\u51c6\u786e\u7387\u548c\u4e13\u4e1a\u5ea6\uff01<\/span>
\n6\u3001\u4e13\u4e1a\u6e90\u4e8e\u4e13\u6ce8|ChinaAutoRegs \u59cb\u7ec8\u4e13\u6ce8\u4e8e\u6c7d\u8f66\u6807\u51c6\u7ffb\u8bd1\u9886\u57df\uff01<\/span>
\n7\u3001\u300c\u4e2d\u56fd\u6c7d\u8f66\u6807\u51c6\u8bd1\u6587\u5e93\u300d\u5df2\u6536\u5f55\u4e0a\u5343\u4e2a\u73b0\u884c\u6c7d\u8f66\u56fd\u5bb6\u6807\u51c6\u548c\u884c\u4e1a\u6807\u51c6\u7684\u82f1\u6587\u7248\u8bd1\u672c\uff0c\u6db5\u76d6\u4f20\u7edf\u71c3\u6cb9\u8f66\u3001\u65b0\u80fd\u6e90\u6c7d\u8f66\u548c\u6469\u6258\u8f66\u6807\u51c6\u5316\u4f53\u7cfb\uff01\u72ec\u5bb6\u6253\u9020\u5343\u4e07\u7ea7\u6c7d\u8f66\u4e13\u4e1a\u672f\u8bed\u5e93\u548c\u8bb0\u5fc6\u5e93\u3002<\/span><\/p>\n
\n2. You may request for sample pages to your preference before placing an order.<\/span>
\n3. Please contact standardtrans@foxmail.com for the complete PDF version in English.<\/span>
\n4. Almost all of Chinese automotive\/automobile standards, regulations and norms in effect have been included in our well-established database, providing one-stop, up-to-date, efficient and professional solution.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"