ChinaAutoRegs|GB\/T 20042.2-2008 \u82f1\u6587\u7248 \u8d28\u5b50\u4ea4\u6362\u819c\u71c3\u6599\u7535\u6c60 \u7535\u6c60\u5806\u901a\u7528\u6280\u672f\u6761\u4ef6
\nProton Exchange Membrane Fuel Cell – General Technical Specification of Fuel Cell Stacks<\/p>\n
<\/p>\n
<\/p>\n
1 SCOPE<\/p>\n
This Part of GB\/T 20042 specifies the basic requirements for safety and performance of proton exchange membrane fuel cell stacks (including direct alcohol fuel cell stacks), and the requirements for type inspection and routine inspection items, test methods, and markings and instructions.
\nThis Part is applicable to proton exchange membrane fuel cell stacks (including direct alcohol fuel cell stacks) (hereinafter referred to as “fuel cell stacks”).
\nThis Part deals with conditions that can yield hazards to persons and damage outside the fuel cell stacks only. Protection against damage to the fuel cell stack internals is not addressed in this Part, provided it does not lead to hazards outside the module.
\nThis Part does not cover the storage devices of fuel and oxidant or the delivery process and devices of fuel and oxidant.
\nAlternatively, any other fuel cell stacks, which employ better materials or have new structures, and which can pass the inspections specified in this Part and meet the relevant requirements, may also be considered to comply with this Part.<\/p>\n
2 NORMATIVE REFERENCES<\/p>\n
The following standards contain provisions which, through reference in this Part, constitute provisions of this Part. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement based on this Part are encouraged to investigate the possibility of applying the latest editions of the standards. For undated references, the latest edition of the normative document referred to applies.
\nGB\/T 2423.10 Environmental testing for electric and electronic products – Part 2: Test methods Test Fc and guidance: Vibration (Sinusoidal) (GB\/T 2423.10-2008, IEC 60068-2-6: 1995, IDT)
\nGB\/T 2423.55 Environmental testing for electric and electronic products – Part 2 : Test methods – Test Eh: hammer tests (GB\/T 2423.55-2006, IEC 60068-2-75\uff1a1997, IDT)
\nGB\/T 3512 Rubber, vulcanized or thermoplastic -Accelerated ageing and heat resistance tests – Air-oven method (GB\/T 3512-2001, eqv ISO 188: 1998)
\nGB 3836 (all parts) Electrical apparatus for explosive atmosphere (IEC 60079 all parts)
\nGB 4208 Degrees of protection provided by enclosure(IP code) (GB 4208-2008, IEC 60529: 2001, IDT)
\nGB 4943 Safety of information technology equipment (GB 4943-2001, IEC 60950-1: 1999, IDT)
\nGB\/T 5095.8 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods – Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations (GB\/T 5095.8-1997, IEC 60512-8: 1993, IDT)
\nGB\/T 5169 Fire hazard testing for electric and electronic products (IEC 60695)
\nGB\/T 5563 Rubber and plastics hoses and hose assemblies – Hydrostatic testing (GB\/T 5563-2006, ISO 1402: 1994, IDT)
\nGB\/T 7826 Analysis techniques for system reliability; Procedure for failure mode and effects analysis(FMEA) (GB\/T 7826-1987, idt IEC 60812: 1985)
\nGB\/T 7829 Procedure for fault tree analysis (GB\/T 829-1987, neq IEC 60056)
\nGB\/T 15329.1 Rubber hoses and hose assemblies-Textile-reinforced hydraulic types-Specification – Part 1: Oil-based fluid applications (GB\/T 15329.1-2003, ISO 4079-1: 2001, MOD)
\nGB\/T 18290 (all parts) Solderless connections (idt IEC 60352 all parts)
\nGB\/T 20042.1 Proton exchange membrane fuel cell-Terminology
\nIEC 61508 (all parts) Functional safety of electrical\/electronic\/programmable electronic safety-related systems
\nISO 37 Rubber, vulcanized or thermoplastic – determination of tensile stress-strain properties
\nISO 1307 Rubber and plastics hoses for general-purpose in industrial applications – Bore diameters and tolerances, and tolerances on length
\nISO 4672 Rubber and plastics hoses – Sub-ambient temperature flexibility tests
\nEN 50178 Electronic equipment for use in power installations<\/p>\n
3 TERMS AND DEFINITIONS<\/p>\n
For the purpose of this part, the terms defined in GB\/T 2900.18, GB 3836.1, GB 4943 and GB\/T 20042.1 apply.<\/p>\n
4 REQUIREMENTS<\/p>\n
To facilitate communications on manufacture and application of fuel cell, this Part includes an informative Annex A for the reference of interested parities.<\/p>\n
1\u3001\u73b0\u6210\u8bd1\u6587\uff0c\u5230\u6b3e\u5373\u53d1\u3002
\n2\u3001\u4e0b\u5355\u524d\u53ef\u4efb\u53d6\u6837\u9875\u9a8c\u8bc1\u8bd1\u6587\u8d28\u91cf\u3002
\n3\u3001\u514d\u8d39\u63d0\u4f9b\u6b63\u89c4\u666e\u901a\u589e\u503c\u7a0e\u6570\u7535\u53d1\u7968\u3002
\n4\u3001\u8bf7\u8054\u7cfb\u624b\u673a\/\u5fae\u4fe1: 13306496964\/Email: standardtrans@foxmail.com \u83b7\u53d6\u5b8c\u6574\u8bd1\u6587\u3002
\n5\u3001\u672c\u82f1\u6587\u8bd1\u672c\u4e3a\u7eaf\u4eba\u5de5\u4e13\u4e1a\u7cbe\u7ffb\u7248\u672c\uff0c\u4fdd\u8bc1\u8bed\u6cd5\u672f\u8bed\u51c6\u786e\u7387\u548c\u4e13\u4e1a\u5ea6\uff01
\n6\u3001\u4e13\u4e1a\u6e90\u4e8e\u4e13\u6ce8|ChinaAutoRegs \u59cb\u7ec8\u4e13\u6ce8\u4e8e\u6c7d\u8f66\u6807\u51c6\u7ffb\u8bd1\u9886\u57df\uff01
\n7\u3001\u300c\u4e2d\u56fd\u6c7d\u8f66\u6807\u51c6\u8bd1\u6587\u5e93\u300d\u5df2\u6536\u5f55\u4e0a\u5343\u4e2a\u73b0\u884c\u6c7d\u8f66\u56fd\u5bb6\u6807\u51c6\u548c\u884c\u4e1a\u6807\u51c6\u7684\u82f1\u6587\u7248\u8bd1\u672c\uff0c\u6db5\u76d6\u4f20\u7edf\u71c3\u6cb9\u8f66\u3001\u65b0\u80fd\u6e90\u6c7d\u8f66\u548c\u6469\u6258\u8f66\u6807\u51c6\u5316\u4f53\u7cfb\uff01\u72ec\u5bb6\u6253\u9020\u5343\u4e07\u7ea7\u6c7d\u8f66\u4e13\u4e1a\u672f\u8bed\u5e93\u548c\u8bb0\u5fc6\u5e93\u3002<\/p>\n
1. The English Translation of this document (GB, GB\/T, QC\/T, CNCA, CQC, CAV, etc.) is readily available, and delivered immediately upon payment.
\n2. You may request for sample pages to your preference before placing an order.
\n3. Please contact standardtrans@foxmail.com for the complete PDF version in English.
\n4. Almost all of Chinese automotive\/automobile standards, regulations and norms in effect have been included in our well-established database, providing one-stop, up-to-date, efficient and professional solution.<\/p>\n","protected":false},"excerpt":{"rendered":"
ChinaAutoRegs|GB\/T 20042.2-2008 \u82f1\u6587\u7248 \u8d28\u5b50\u4ea4\u6362 … \u7ee7\u7eed\u9605\u8bfb