ChinaAutoRegs|GB\/T 1804-2000\u82f1\u6587\u7248\u7ffb\u8bd1 \u4e00\u822c\u516c\u5dee \u672a\u6ce8\u516c\u5dee\u7684\u7ebf\u6027\u548c\u89d2\u5ea6\u5c3a\u5bf8\u7684\u516c\u5dee
\nGeneral Tolerances – Tolerances for linear and angular dimensions without individual tolerance indications<\/p>\n
\n1 Scope
\nThis Standard stipulates the tolerance class and limit deviations value of the general tolerance for linear and angular dimension without tolerance indications.
\nThis Standard is applicable to the dimensions of metal machining and also suitable for the dimensions of ordinary stamping. The dimensions of nonmetal materials and other technological methods can adopt this Standard as a reference.
\nThis Standard is only applicable to the following dimensions without tolerance indications:
\na) Linear dimension (such as outer dimension, inner dimension, ladder dimension, diameter, radius, distance, rounding radius and chamfer height);
\nb) Angular dimension, including the angular dimension usually without angular value, such as right angle (90\u00b0); excepting for the angular value mentioned in GB 1184 or the value of polygon.
\nc) Linear and angular dimensions of the machining components.
\nThis Standard is not suitable for the following dimension:
\na) Linear and angular dimensions involved in other general tolerance standards;
\nb) Reference dimension in the brackets;
\nc) Theoretically exact dimension in rectangular frame space.
\n2 Normative references
\nThe following normative documents contain provision which, through reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated are valid. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the Standards indicated below.
\nGB\/T 1800.1-1997 Limits and Fits Bases Part 1: Terminology
\nGB\/T 1184-1996 Geometrical and Location Tolerance for Features Without Individual Tolerance Indications (EQV ISO 2768-2: 1989\uff09
\nGB\/T 4249-1996 Tolerance Principle (EQV ISO 8015: 1985\uff09
\nGB\/T 6403.4-1986 Rounding and Chamfer of Parts
\n3 Definition
\n3.1 This Standard adopts relevant terminology and definition proposed by GB\/T 1800.1.
\n3.2 General tolerances
\nGeneral tolerances mean the warrantable tolerances under normal machining conditions in workshop. As for the dimension adopting general tolerances, it is unnecessary to indicate the limit deviations after this dimension.
\nNote: Appendix A (Informative) provides the concept and interpretation of the general tolerances.<\/p>\n
1\u3001\u73b0\u6210\u8bd1\u6587\uff0c\u5230\u6b3e\u5373\u53d1\u3002<\/span> 1. The English Translation of this document (GB, GB\/T, QC\/T, CNCA, CQC, CAV, etc.) is readily available, and delivered immediately upon payment.<\/span> ChinaAutoRegs|GB\/T 1804-2000\u82f1\u6587\u7248\u7ffb\u8bd1 \u4e00\u822c\u516c\u5dee \u672a … \u7ee7\u7eed\u9605\u8bfb
\n2\u3001\u4e0b\u5355\u524d\u53ef\u4efb\u53d6\u6837\u9875\u9a8c\u8bc1\u8bd1\u6587\u8d28\u91cf\u3002<\/span>
\n3\u3001\u514d\u8d39\u63d0\u4f9b\u6b63\u89c4\u666e\u901a\u589e\u503c\u7a0e\u6570\u7535\u53d1\u7968\u3002<\/span>
\n4\u3001\u8bf7\u8054\u7cfb\u624b\u673a\/\u5fae\u4fe1: 13306496964\/Email: standardtrans@foxmail.com \u83b7\u53d6\u5b8c\u6574\u8bd1\u6587\u3002<\/span>
\n5\u3001\u672c\u82f1\u6587\u8bd1\u672c\u4e3a\u7eaf\u4eba\u5de5\u4e13\u4e1a\u7cbe\u7ffb\u7248\u672c\uff0c\u4fdd\u8bc1\u8bed\u6cd5\u672f\u8bed\u51c6\u786e\u7387\u548c\u4e13\u4e1a\u5ea6\uff01<\/span>
\n6\u3001\u4e13\u4e1a\u6e90\u4e8e\u4e13\u6ce8|ChinaAutoRegs \u59cb\u7ec8\u4e13\u6ce8\u4e8e\u6c7d\u8f66\u6807\u51c6\u7ffb\u8bd1\u9886\u57df\uff01<\/span>
\n7\u3001\u300c\u4e2d\u56fd\u6c7d\u8f66\u6807\u51c6\u8bd1\u6587\u5e93\u300d\u5df2\u6536\u5f55\u4e0a\u5343\u4e2a\u73b0\u884c\u6c7d\u8f66\u56fd\u5bb6\u6807\u51c6\u548c\u884c\u4e1a\u6807\u51c6\u7684\u82f1\u6587\u7248\u8bd1\u672c\uff0c\u6db5\u76d6\u4f20\u7edf\u71c3\u6cb9\u8f66\u3001\u65b0\u80fd\u6e90\u6c7d\u8f66\u548c\u6469\u6258\u8f66\u6807\u51c6\u5316\u4f53\u7cfb\uff01\u72ec\u5bb6\u6253\u9020\u5343\u4e07\u7ea7\u6c7d\u8f66\u4e13\u4e1a\u672f\u8bed\u5e93\u548c\u8bb0\u5fc6\u5e93\u3002<\/span><\/p>\n
\n2. You may request for sample pages to your preference before placing an order.<\/span>
\n3. Please contact standardtrans@foxmail.com for the complete PDF version in English.<\/span>
\n4. Almost all of Chinese automotive\/automobile standards, regulations and norms in effect have been included in our well-established database, providing one-stop, up-to-date, efficient and professional solution.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"