ChinaAutoRegs\uff5cGB\/T 18487.3-2001 \u82f1\u6587\u7248\/English\/\u7ffb\u8bd1\/\u7535\u52a8\u8f66\u8f86\u4f20\u5bfc\u5145\u7535\u7cfb\u7edf\u7535\u52a8\u8f66\u8f86\u4ea4\u6d41\uff0f\u76f4\u6d41\u5145\u7535\u673a(\u7ad9)
\nElectric Vehicle Conductive Charging System – A.C.\/D.C. Electric Vehicle Charging Station<\/p>\n
<\/p>\n
1 Scope<\/p>\n
This standard, together with GB\/T 18487.1, gives specific requirements (maximum AC voltage of 660V and maximum DC voltage of 1,000V in accordance with GB 156-1993) for conductive connection to A.C.\/D.C. electric vehicle charging station.
\nFor A.C. charging station, this standard does not cover box type assemblies with socket-outlets, installed for the purpose of delivering energy to the vehicle, which have no charging control functions.
\nAccording to GB\/T 18487.1, the charging mode of D.C. electric vehicle charging station shall be Mode 4.
\nThis standard does not cover all other safety aspects related to maintenance.<\/p>\n
2 Normative References<\/p>\n
The following Standards contain provisions which through reference in this text, constitute provisions of this Standard. At the time this Standard is published, the edition of the existing Standard indicated shall be effective. All Standards shall undergo revision. Parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the Standards indicated below.<\/p>\n
GB\/T 156-1993 Standard voltage
\nGB\/T 2423.1-1989 Basic environmental testing procedures for electric and electronic products–Tests A: Cold (eqv IEC 60068-2-1:1 974)
\nGB\/T 2423.2-1989 Basic environmental testing procedures for electric and electronic products Tests B: Dry heat (eqv IEC 600682-2:1974)
\nGB\/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products\uff0dTest Ca: Damp heat, steady state (eqv IEC60068-2-3:1984)
\nGB\/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products\uff0dTest Db: Damp heat, cyclic (eqv IEC60068-2-30:1980)
\nGB\/T 2423.18-1985 Basic environmental testing procedures for electric and electronic products–Test Kb: salt mist cyclic (sodium chloride solution)(idt IEC 60068-2-52;1996)
\nGB\/T 2423.22-1987 Environmental testing for electric and electronic products-Test N: Change of temperature (eqv IEC60068-2-14:1984)
\nGB\/T 2423.24-1995 Environmental testing for electric and electronic products Part 2: Test methods Test Sa: Simulated solar radiation at ground level (idt IEC 60068-2-5:1975)
\nGB 4208-1993 Degrees of protection provided by envelope (IP code) (eqv IEC 60529:1989)
\nGB\/T 6113.1-1995 Specifications for radio disturbance and immunity measuring apparatus (eqv CISPR 16-1:1993)
\nGB\/T 6113.2-1998 Methods of measurement of radio disturbance and immunity(eqv CISPR 16-2:1996)
\nGB 7251.1-1997 Low-voltage switchgear and controlgear assemblies-Part 1: Type-tested and partially type-tested assemblies (idt IEC 60439-1:1992)
\nGB 9254-1998 Information technology equipment–Radio disturbance characteristics–Limits and methods of measurement (1dt ClSPR 22:1997)
\nGB 16895.5-2000 Electrical installations of buildings–Part 4: Protection for safety–Chapter 43: Protection against overcurrent (idt IEC 60364-4-43:1990)
\nGB\/T 16935.1-1997 Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests (idt IEC 60664-1:1992)
\nLow-voltage power supply devices, d.c. output–Performance characteristics and safety requirements (eqv IEC 61204:1993)
\nGB 17625.1-1998 The limits for the harmonic current emissions caused by low-voltage electrical and electronic equipments (equipment input current\u226416A per phase) (eqv IEC 61000-3-2:1995)
\nGB\/T 17626.1-1998 Electromagnetic compatibility –Testing and measurement techniques –Overview of immunity tests (idt IEC 61000-4-l; 1995)
\nGB\/T 17626.2-1998 Electromagnetic compatibility–Testing and measurement techniques–Electrostatic discharge immunity test (idt IEC 61000-4-2:1995)
\nGB\/T 17626.3-1998 Electromagnetic compatibility–Testing and measurement techniques–Radiated, radio-frequency, electromagnetic field immunity test (idt IEC 6l000-4-3:1995)
\nGB\/T 17626.4-1998 Electromagnetic compatibility–Testing and measurement techniques–Electrical fast transient\/burst immunity test (idt IEC 61000-4-4:1995)
\nGB\/T 17626.5-1999 Electromagnetic compatibility – Testing and measurement techniques – Surge immunity test (idt IEC 61000-4-5:1995)
\nGB\/T 17626.11-1999 Electromagnetic compatibility Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests (idt IEC 61000-4-11:1994)
\nGB\/T 17627.1-1998 High-voltage test techniques for low-voltage equipment Part 1: Definitions, test and procedure requirements (eqv IEC 61180-1: 1992)
\nGB\/T 18487.1-2001 Electric vehicle conductive charging system–Part 1: General requirements (eqv IEC 61851-1:2001)
\nIEC 60364-4-443: 1995 Electrical installations of buildings – Part 4: Protection for safety – Chapter 44: Protection against overvoltages – Section 443: Protection against overvoltages of atmospheric origin or due to switching
\nIEC 61000-2-2 1990 Electromagnetic compatibility (EMC) – Part 2-2: Environment – Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems
\nIEC 61036: 1990 Alternating current static watt-hour meters for active energy (classes 1 and 2)<\/p>\n
1\u3001\u73b0\u6210\u8bd1\u6587\uff0c\u5230\u6b3e\u5373\u53d1\u3002<\/span> 1. The English Translation of this document is readily available, and delivered immediately upon payment.<\/span> ChinaAutoRegs\uff5cGB\/T 18487.3-2001 \u82f1\u6587\u7248\/Engl … \u7ee7\u7eed\u9605\u8bfb
\n2\u3001\u4e0b\u5355\u524d\u53ef\u4efb\u53d6\u6837\u9875\u9a8c\u8bc1\u8bd1\u6587\u8d28\u91cf\u3002<\/span>
\n3\u3001\u514d\u8d39\u63d0\u4f9b\u6b63\u89c4\u666e\u901a\u589e\u503c\u7a0e\u6570\u7535\u53d1\u7968\u3002<\/span>
\n4\u3001\u8bf7\u8054\u7cfb\u624b\u673a\/\u5fae\u4fe1: 13306496964\/Email: standardtrans@foxmail.com \u83b7\u53d6\u5b8c\u6574\u8bd1\u6587\u3002<\/span>
\n5\u3001\u672c\u82f1\u6587\u8bd1\u672c\u4e3a\u7eaf\u4eba\u5de5\u4e13\u4e1a\u7cbe\u7ffb\u7248\u672c\uff0c\u4fdd\u8bc1\u8bed\u6cd5\u672f\u8bed\u51c6\u786e\u7387\u548c\u4e13\u4e1a\u5ea6\uff01<\/span>
\n6\u3001\u4e13\u4e1a\u6e90\u4e8e\u4e13\u6ce8|ChinaAutoRegs \u59cb\u7ec8\u4e13\u6ce8\u4e8e\u6c7d\u8f66\u6807\u51c6\u7ffb\u8bd1\u9886\u57df\uff01<\/span>
\n7\u3001\u300c\u4e2d\u56fd\u6c7d\u8f66\u6807\u51c6\u8bd1\u6587\u5e93\u300d\u5df2\u6536\u5f55\u4e0a\u5343\u4e2a\u73b0\u884c\u6c7d\u8f66\u56fd\u5bb6\u6807\u51c6\u548c\u884c\u4e1a\u6807\u51c6\u7684\u82f1\u6587\u7248\u8bd1\u672c\uff0c\u6db5\u76d6\u4f20\u7edf\u71c3\u6cb9\u8f66\u3001\u65b0\u80fd\u6e90\u6c7d\u8f66\u548c\u6469\u6258\u8f66\u6807\u51c6\u5316\u4f53\u7cfb\uff01\u72ec\u5bb6\u6253\u9020\u5343\u4e07\u7ea7\u6c7d\u8f66\u4e13\u4e1a\u672f\u8bed\u5e93\u548c\u8bb0\u5fc6\u5e93\u3002<\/span><\/p>\n
\n2. You may request for sample pages to your preference before placing an order.<\/span>
\n3. Please contact standardtrans@foxmail.com for the complete PDF version in English.<\/span>
\n4. Almost all of Chinese automotive\/automobile standards, regulations and norms (GB, GB\/T, QC\/T, CNCA, CQC, CAV, etc.) in effect have been included in our well-established database, providing one-stop, up-to-date, efficient and professional solution.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"