ChinaAutoRegs\uff5cGB\/T 4208-2017\u82f1\u6587\u7248\/English\/\u7ffb\u8bd1\/\u5916\u58f3\u9632\u62a4\u7b49\u7ea7\uff08IP\u4ee3\u7801\uff09
\nDegrees of Protection Provided By Enclosure (IP code)<\/p>\n
\n1 SCOPE<\/p>\n
This standard applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72.5 kV.
\nThe object of this standard is to give:
\na) Definitions for degrees of protection provided by enclosures of electrical equipment as regards:
\n1) Protection of persons against access to hazardous parts inside the enclosure;
\n2) Protection of the equipment inside the enclosure against ingress of solid foreign objects;
\n3) Protection of the equipment inside the enclosure against harmful effects due to the ingress of water.
\nb) Designations for the degrees of protection.
\nc) Requirements for each designation.
\nd) Tests to be performed to verify that the enclosure meets the requirements of this standard.
\nIt will be specified in the product standards to decide on the extent and manner in which, the classification is used in their standards and to define \u201cenclosure\u201d as it applies to their equipment. However, it is recommended that for a given classification the tests do not differ from those specified in this standard. If necessary, complementary requirements may be included in the relevant product standard. A guide for the details to be specified in relevant product standards is given in Annex B.
\nFor a particular type of equipment, a product standard may specify different requirements provided that at least the same level of safety is ensured.
\nThis standard deals only with enclosures that are in all other respects suitable for their intended use as specified in the relevant product standard and which from the point of view of materials and workmanship ensure that the claimed degrees of protection are maintained under the normal conditions of use.
\nThis standard is also applicable to empty enclosures provided that the general test requirements are met and that the selected degree of protection is suitable for the type of equipment to be protected.
\nMeasures to protect both the enclosure and the equipment inside the enclosure against external influences or environmental conditions such as mechanical impacts, corrosion, corrosive solvents (e.g. cutting liquids), fungus, vermin, solar radiation, icing, moisture (e.g. produced by condensation), explosive atmospheres, and the protection against contact with hazardous moving parts external to the enclosure (e.g. fans), are matters for the relevant product standard to be protected.
\nBarriers external to the enclosure and not attached to it and obstacles which have been provided solely for the safety of personnel are not considered as a part of the enclosure and are not dealt with in this standard.<\/p>\n
2 NORMATIVE REFERENCES<\/p>\n
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
\nGB\/T 2421.1- 2008 Environmental Testing for Electric and Electronic products – General and Guidance (IEC 60068-1:1988, IDT)
\nGB\/T 2423.37- 2006 Environmental testing for electric and electronic products – Part 2: Test methods – Test L: Dust and sand (IEC 60068-2-68: 1994, IDT)
\nIEC 60050-195: 1998 International Electrotechnical Vocabulary – Part 195: Earthing and protection against electric shock
\nIEC 60050(826): 1982 International Electrotechnical Vocabulary – Electrical installations of buildings
\nIEC 60071-2:1996 Insulation co-ordination – Part 2: Application guide<\/p>\n
3 TERMS AND DEFINITIONS<\/p>\n
For the purpose of this standard, the following terms and definitions apply.<\/p>\n
<\/p>\n
1\u3001\u73b0\u6210\u8bd1\u6587\uff0c\u5230\u6b3e\u5373\u53d1\u3002<\/span> 1. The English Translation of this document is readily available, and delivered immediately upon payment.<\/span> ChinaAutoRegs\uff5cGB\/T 4208-2017\u82f1\u6587\u7248\/English\/ … \u7ee7\u7eed\u9605\u8bfb
\n2\u3001\u4e0b\u5355\u524d\u53ef\u4efb\u53d6\u6837\u9875\u9a8c\u8bc1\u8bd1\u6587\u8d28\u91cf\u3002<\/span>
\n3\u3001\u514d\u8d39\u63d0\u4f9b\u6b63\u89c4\u666e\u901a\u589e\u503c\u7a0e\u6570\u7535\u53d1\u7968\u3002<\/span>
\n4\u3001\u8bf7\u8054\u7cfb\u624b\u673a\/\u5fae\u4fe1: 13306496964\/Email: standardtrans@foxmail.com \u83b7\u53d6\u5b8c\u6574\u8bd1\u6587\u3002<\/span>
\n5\u3001\u672c\u82f1\u6587\u8bd1\u672c\u4e3a\u7eaf\u4eba\u5de5\u4e13\u4e1a\u7cbe\u7ffb\u7248\u672c\uff0c\u4fdd\u8bc1\u8bed\u6cd5\u672f\u8bed\u51c6\u786e\u7387\u548c\u4e13\u4e1a\u5ea6\uff01<\/span>
\n6\u3001\u4e13\u4e1a\u6e90\u4e8e\u4e13\u6ce8|ChinaAutoRegs \u59cb\u7ec8\u4e13\u6ce8\u4e8e\u6c7d\u8f66\u6807\u51c6\u7ffb\u8bd1\u9886\u57df\uff01<\/span>
\n7\u3001\u300c\u4e2d\u56fd\u6c7d\u8f66\u6807\u51c6\u8bd1\u6587\u5e93\u300d\u5df2\u6536\u5f55\u4e0a\u5343\u4e2a\u73b0\u884c\u6c7d\u8f66\u56fd\u5bb6\u6807\u51c6\u548c\u884c\u4e1a\u6807\u51c6\u7684\u82f1\u6587\u7248\u8bd1\u672c\uff0c\u6db5\u76d6\u4f20\u7edf\u71c3\u6cb9\u8f66\u3001\u65b0\u80fd\u6e90\u6c7d\u8f66\u548c\u6469\u6258\u8f66\u6807\u51c6\u5316\u4f53\u7cfb\uff01\u72ec\u5bb6\u6253\u9020\u5343\u4e07\u7ea7\u6c7d\u8f66\u4e13\u4e1a\u672f\u8bed\u5e93\u548c\u8bb0\u5fc6\u5e93\u3002<\/span><\/p>\n
\n2. You may request for sample pages to your preference before placing an order.<\/span>
\n3. Please contact standardtrans@foxmail.com for the complete PDF version in English.<\/span>
\n4. Almost all of Chinese automotive\/automobile standards, regulations and norms (GB, GB\/T, QC\/T, CNCA, CQC, CAV, etc.) in effect have been included in our well-established database, providing one-stop, up-to-date, efficient and professional solution.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"