ChinaAutoRegs｜GB 15766.1-2008 英文版/English/翻译/道路机动车辆灯泡尺寸、光电性能要求
Lamps for Road Vehicles – Dimensional, Electrical and Luminous Requirements
1 General
1.1 Scope
This part applies to lamps (either filament or gas-discharge type) to be used in headlamps, fog-lamps and signaling lamps for road vehicles, especially those lamps which may be the subject of legislation. In particular, it covers those lamps contained
in the Regulations No. 37 and No. 99 of the Geneva Agreement of March 20th 1958 of the United Nations Economic Commission for Europe (ECE).
This part specifies the test methods for production lamps and standard lamps, as well as the technical requirements for the basic interchangeability (dimensions, electrical and luminous performance). Most requirements are set out in the related “data sheets”. As for all the lamps listed in Chapter 5, the data sheets are provided herein. Performance requirements such as lamp life, lumen maintenance, torsion strength and resistance to vibration and shock are specified in GB/T 15766.2. Information such as temperature limits and maximum lamp outlines is also included in GB/T15766.2 for guidance of lighting equipment design.
Road vehicle lamps for supplementary purposes which are not the subject of legislation are specified in GB/T 15766.3.
Upon development of approval regulation, it is suggested that reference is made to this part for assessment of production compliance. GB/T 15766.2 and GB/T 15766.3 are not intended for such purpose.
Note: In various glossaries and standards, different terms are used for “incandescent lamp” (845-07-04 under GB/T 2900.65) and “discharge lamp” (845-07-17 under GB/T 2900.65). In this part, “filament lamp” and “discharge lamp” are adopted, respectively. For the individually used word “lamp”, nevertheless, both categories are referred to, unless it is clearly stipulated in the context that it is used just to indicate any one category.
1.2 Normative References
The following documents contain provisions which, through reference in this text, constitute requirements of this Standard. For dated references, subsequent amendments (exclusive of the content of corrigenda) to, or revisions of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the latest editions of the documents indicated below. For undated references, the latest edition shall apply.
GB/T 2900.65 Electrotechnical terminologies – Lighting (GB/T 2900.65-2004, IEC 60050(845):1987, MOD)
GB 4599 Filament headlamps for motor vehicles
GB 4660 Filament frontal fog lamps for motor vehicles
GB 5948 Photometric characteristics of incandescent filament headlamps for motorcycles
GB/T 15766.2 Lamps for road vehicles – Performance requirements (GB/T 15766.2-2007, IEC 60810: 2003, IDT)
GB/T 15766.3 Miniature lamps (GB/T 15766.3-2007, IEC 60983:2005, IDT)
IEC 60051 Direct and indicating analogue electrical measuring instruments and their accessories
IEC60061-1:1969 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 1: Lamp caps
ECE R19 Uniform provisions concerning the approval of power-driven vehicles with respect to front fog lamps
1.3 Terms and Definitions
For the purpose of this part, the following terms and their definitions apply.
***********************************************
现成译文，到款即发。
支持样页验证质量。免费提供增值税发票。
请联系 QQ: 564965870/微信: 13306496964/Email: standardtrans@foxmail.com 购买完整译文(PDF/Word)。
专业源于专注|ChinaAutoRegs 始终专注于机动车标准翻译！迄今为止已翻译上千个国内外汽车法规标准！独家打造千万级汽车专业术语库和记忆库。